Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTrusted Window Installation for Sunrise Manor Homeowners
Window installation is the job of putting a new window into a wall opening and making it airtight, watertight and square, and in Sunrise Manor it matters more than in most places. The desert swings from triple-digit summer afternoons to cold winter nights, and a window that wasn’t sealed and flashed properly will let that swing straight into your living room. Sunrise Manor Windows & Doors specializes in windows and doors only. Our technicians have up to 8 years of experience, we work with eight manufacturer brands, and we install and replace windows and install doors under one contractor. Estimates are free, written line-item, and the price is fixed once you approve it. Call (888) 335-0658 to schedule yours.
Casement Windows
Casement Windows are the ones that swing out on a side hinge, cranked open with a handle, and they’re a strong choice on a Sunrise Manor wall that faces the afternoon sun because the whole sash opens for airflow. You need one when a room has a narrow opening, when you want a clear unobstructed view without a center rail, or when you’re matching an older home where the original openings were built for swing windows. Sunrise Manor Windows & Doors installs casement units from lines including PGT, CGI and ES Windows, and we fit the crank hardware so it opens smoothly and locks tight. Typical casement installation runs about $450 to $900 per window depending on size, frame material and glass package; the written estimate sets the final price.
Hinged Airflow and Sealing
A casement seals on all four sides when the crank pulls the sash against the frame, which makes it one of the tighter-closing styles in a windy spot. That tight seal is why casements handle dust storms better than sliders. The trade-off is that the sash hangs out into the yard when open, so placement matters.
Crank Hardware and Hinge Care
The crank and hinge are the parts that wear, not the glass. We check the operator arm and the hinge points on installation and set them so the sash closes evenly. A properly set casement shouldn’t need force to lock.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Double Hung Windows
Double Hung Windows have two sashes that slide up and down independently, and they’re the most common style on Sunrise Manor homes because they fit standard wall openings and let you crack the top sash for ventilation while the bottom stays locked. You need double hungs when you’re replacing a bedroom or living room window and want tilt-in sashes for easy cleaning, or when you’re matching the rest of the house. Sunrise Manor Windows & Doors installs double hung units across our brand lines, and we check the balance system so each sash stays where you put it. Typical double hung installation runs about $400 to $800 per window depending on size and glass; the estimate you receive in writing sets the final price.
Tilt-In Cleaning Access
Most modern double hungs tilt inward so you can clean the outside glass from inside the room. That matters on a single-story home where reaching the exterior isn’t practical. We make sure the tilt latches release cleanly and seat again when you close them.
Balance and Sash Alignment
The balance mechanism is what holds the sash up when you open it. If a sash drifts down on its own, the balance is worn or misaligned. We check alignment at install so neither sash drags.
Vinyl Windows
Vinyl Windows are built with a PVC frame rather than wood, aluminum or fiberglass, and they’re a practical pick for Sunrise Manor because the material doesn’t rot, warp or need repainting in a dry climate that bakes everything on the south and west walls. You need vinyl when you want a low-maintenance frame, a tighter budget, or a whole-house replacement where consistency across every opening matters. Sunrise Manor Windows & Doors installs vinyl units from lines including ECO Window Systems and ES Windows, matched to the exposure of each wall. Typical vinyl installation runs about $350 to $700 per window depending on size, glass package and whether the opening needs framing work; the written estimate sets the final price.
Frame Color and Finish Options
Vinyl frames come in white, tan and a few darker finishes, and the color is molded through rather than painted on. That means chips don’t show through to bare material. We can match the trim on an existing home or go darker on a shaded wall.
Low-Maintenance Performance
A vinyl frame needs washing, not repainting. In a desert climate with intense UV, the quality of the vinyl compound matters more than the thickness of the frame. We match the product to the sun exposure of each wall.
Picture Window
Picture Window is the large, fixed unit that doesn’t open, built to frame a view and let in light rather than ventilate a room. You need one when a wall faces something worth looking at, when you want a large uninterrupted pane without mullions cutting the view, or when a living room needs more daylight than a standard opening allows. Sunrise Manor Windows & Doors installs fixed picture units from lines including CWS and PGT, sized and set so the glass carries the load correctly. Typical picture window installation runs about $600 to $1,400 depending on span, glass package and how much framing the opening needs; the written estimate sets the final price.
Framing a Fixed Opening
A picture window carries more weight than an operable one because the glass spans the whole opening. The header and rough opening need to be right before the unit goes in. We check the opening before we order.
Glass and Solar Control
A big fixed pane on a west wall collects heat all afternoon. Low-E coatings and solar-control glass cut that gain without darkening the view much. We’ll walk you through the options.
Bay Window Installation
Bay Window Installation is the job of building out a window that projects beyond the exterior wall, usually as three panes in an angled arrangement, and it’s a bigger project than a flush replacement. You need it when a room could use the extra floor space and daylight a bay creates, or when you’re replacing an existing bay that has sagged or leaked at the roof joint. Sunrise Manor Windows & Doors handles bay projects from measurement through framing, flashing and interior finish, using products from our brand lines. Typical bay window installation runs about $1,800 to $4,500 depending on width, number of panes and how much structural work the projection needs; the written estimate sets the final price.
Structural Projection and Support
A bay hangs past the wall line, so it needs proper support underneath and a framed roof on top. We confirm what the existing wall can carry before we quote. Skipping that step is how bays sag.
Flashing Against Desert Rain
Sunrise Manor gets heavy rain in short bursts during monsoon season, and a bay has more seams for water to find than a flat window. We flash the top, sides and base so runoff sheds away from the wall. That flashing is the difference between a dry bay and a wet ceiling.
Window Contractor
Window Contractor is the licensed trade that measures, orders, installs and finishes your windows, and picking the right one matters more than picking the window. You need a contractor when a project involves more than one opening, when the rough framing needs adjustment, or when a permit is required for the work. Sunrise Manor Windows & Doors pulls the permits and passes the inspections on projects that need them, works from written line-item quotes, and backs the work with a workmanship warranty. We’re licensed and insured. Typical contractor-led installation runs about $400 to $1,200 per opening depending on scope; the written estimate sets the final price.
Permits and Inspection
Most cities require a permit when you change the size of a window opening or alter the framing. We handle the paperwork and the inspection scheduling. Ask your city’s building department what applies to your project.
Written Line-Item Quotes
You should see the window cost, the labor, the trim and the disposal as separate lines. That way you can compare bids honestly. We put it in writing before you commit.
Window Installers
Window Installers are the technicians fitting and sealing each unit, and the care taken at that stage decides whether a window performs for many years or starts leaking early. You need installers who level the unit, shim it correctly, seal the perimeter and flash the exterior, not just drop a new sash into an old frame. Sunrise Manor Windows & Doors fits every unit with attention to the wall assembly in this climate, and our technicians have up to 8 years of experience. Typical labor on an installation runs about $150 to $400 per window as part of the total; the written estimate sets the final price.
Level, Shim and Seal
A window set out of level will bind when you open it and let air past the weatherstripping. We shim at the corners and check with a level before fastening. The perimeter seal and exterior flashing finish the job.
Exterior Flashing Detail
Flashing is the metal or membrane that sends water away from the wall above and around the window. It’s the least visible part of the install and the most important. A good flashing detail protects the wall for the life of the window.
Brands We Service
We install and service double hung, casement, picture and bay windows from PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass and ViewLux, and Therma-Tru entry doors. Each line has its own strengths. PGT and CGI are the ones we reach for when impact resistance tops the list, CWS handles large fixed units well, and ECO Window Systems and ES Windows give us strong energy-focused options for the desert heat. Knowing where each line wears, how its hardware adjusts and what its glass packages do in this climate is the whole reason we carry more than one.
That range is what lets us recommend by project rather than by margin. If you’re replacing a whole house, we can match the product to each wall’s sun exposure instead of forcing one line through every opening. If you’re adding a bay, we can pick a system that suits the projection. Whether you have PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, ViewLux or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Drafts near the frame. If you can feel air moving around the sash on a still day, the weatherstripping, sealant or framing is failing. A draft means conditioned air is leaving and dust is getting in, and the gap usually widens with each season.
- Condensation between panes. Fog inside a sealed double-pane unit means the seal is gone and the insulating gas has escaped. The window is no longer doing its energy job, and the fog won’t clear on its own.
- Sticking or hard-to-open sashes. A window that needs force to open is out of square, has a failing balance or has swollen at the frame. Forcing it stresses the glass and the hardware, so it’s worth having looked at.
- Water stains or soft trim inside. A dark streak on the drywall below a window or trim that feels soft points to a flashing or seal failure on the exterior. Catch it early and the fix is usually the window perimeter, not the wall.
- Visible gaps or cracked glass after a storm. Monsoon winds and flying debris can crack a pane or shift a unit in its opening. A damaged window is a security and water problem at once, so call and we’ll assess it.
Our Process, Step by Step
- 1
Free in-home measure. We look at every opening, check the wall assembly and confirm what size and style fits. We measure the rough opening, not just the existing window, because that’s what determines the real product and the real price.
- 2
Product selection from eight brands. We walk you through the options that fit your exposure, budget and look, and we recommend by project rather than by what one vendor is pushing. You see the trade-offs before you commit.
- 3
Written line-item quote. You get the window cost, labor, trim, disposal and any permit work as separate lines. The price is fixed once you approve it, and change orders only happen if you ask for a change.
- 4
Installation and flashing. We protect the interior, set each unit level and shimmed, seal the perimeter and install the exterior flashing. Our technicians have up to 8 years of experience and check their own work before they close up the opening.
- 5
Final walkthrough and cleanup. We test every operable sash, check locks and cranks, clean up the debris and walk you through what was done. If a permit inspection is required, we handle it.
How Much Does Window Installation Cost in Sunrise Manor?
Window installation in Sunrise Manor typically runs about $350 to $1,200 per opening, depending on style, size, glass package and how much framing the wall needs. A typical double hung window in Sunrise Manor runs $400 to $800 installed. A casement runs about $450 to $900, a fixed picture window about $600 to $1,400, and a bay window project about $1,800 to $4,500 for the full build-out. Vinyl frames sit at the lower end of each range; larger glass, solar-control packages and impact-rated products push toward the top.
What moves the price most is the opening itself. A straight swap into an existing frame costs less than a job where the rough opening has to be adjusted, the trim replaced or the wall refinished. Glass choice is the second lever: a basic dual-pane unit and a solar-control package in the same frame are different prices for the same labor. Material is the third.
The way to avoid overpaying is to compare line-item quotes instead of totals, and to make sure every quote includes flashing, trim and disposal. A low bid that leaves out the flashing detail costs more later. Our free estimate covers the whole scope in writing, and the final price is set by that written estimate, with fixed pricing and no change orders unless you request a change. Call (888) 335-0658 to schedule yours.
Our Service Area Near Sunrise Manor
We work across the east valley and the surrounding communities, including Whitney, Winchester, North Las Vegas, Paradise and Las Vegas, and further out to Henderson, Spring Valley, Enterprise, Summerlin, Boulder City and Sandy Valley. Requests in the immediate Sunrise Manor area and the neighborhoods around it get booked into the first available opening, and outlying areas are scheduled with travel in mind. If you’re just starting to compare options, our page on window installation covers the neighboring area, and we serve Winchester as well.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Window Installation in Sunrise Manor
Window installation is the process of fitting a new window into a wall opening and sealing it so it’s airtight, watertight and square. It includes measuring the rough opening, setting the unit level and shimmed, sealing the perimeter, flashing the exterior and finishing the trim. It differs from a pocket replacement only if the framing changes; otherwise the work is done from the exterior and interior of the same opening.
A single window usually takes a few hours, and a whole-house project is typically spread over several days. A bay window takes longer because it involves framing, a roof and flashing. Weather, permit inspections and how much trim work is involved all affect the schedule. We give you a timeline with the written estimate.
Most Sunrise Manor installations run about $350 to $1,200 per opening, with double hung units typically $400 to $800, picture windows $600 to $1,400 and bays $1,800 to $4,500. The written estimate sets the final price. Call (888) 335-0658 for an exact quote; estimates are free.
Yes. We install PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass and ViewLux windows, plus Therma-Tru entry doors. Having several lines lets us match the product to your exposure and budget rather than pushing one brand. We’ll explain the trade-offs honestly.
Same-day service is available when the schedule allows, and we’ll tell you honestly when we can get to your project. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday, and we’re closed on Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Yes. The installation is backed by a workmanship warranty, and the windows themselves carry the manufacturer’s warranty on top of that. We’re licensed and insured, we pull permits and pass inspections on projects that need them, and we hand over the paperwork at the end. Ask us to walk through the coverage at your estimate.
Clear furniture and wall hangings away from each window, and plan for the room to be open to the outdoors while the unit is being set. Move pets to a closed room. We handle the protection and cleanup, so you don’t need to do much beyond making the space accessible.
Schedule Your Window Installation Service in Sunrise Manor Today
Eight brands, one specialist and a written estimate that spells out every line. Whether you need one window replaced or a whole house of new openings, our team specializes in windows and doors only, and the estimate is free with no obligation. Call (888) 335-0658. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday. Let’s find the right window for your home.
Written by the team at Sunrise Manor Windows & Doors.