Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Windows & Doors in Boulder City, NV
We provide independent CGI window and door service across Boulder City, from the 1930s core to the newer tract pockets at the edges. The one thing that makes our CGI work here different is the housing itself: most of this town was built as a federal company town for Hoover Dam, so a CGI unit here is usually sitting in an original wood or steel sash opening that has had decades of desert heat working on it. We’re not authorized, sponsored, or endorsed by CGI; we’re an independent specialist that knows these products well. Call (888) 335-0658 to set up a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Boulder City Residents Choose Us for CGI Service
Sunrise Manor Windows & Doors is a windows-and-doors specialist, not a general contractor spreading itself across a dozen trades. That focus is why our CGI work reads the frame and the sash before anything else. A CGI window that’s failing in Boulder City usually isn’t failing because CGI built a bad unit. It’s failing because of what it was set into and what the desert has done to the seals around it.
We diagnose at that level instead of pushing a one-size-fits-all insert swap. If a frame is sound and the hardware is the problem, we’ll tell you, and we’ll match CGI-specific tilt latches, roller assemblies and sash balances to the actual series rather than forcing a part that almost fits. If the original opening is too far gone, full-frame replacement is the honest call and we’ll say so.
Our technicians have up to 8 years of experience, and every recommendation comes from working these products rather than reading a spec sheet. We’re part of a portfolio that spans eight manufacturer lines across impact-rated, energy-efficient and premium entry-door categories, so the right product gets chosen by what the project actually needs. Scheduling is straightforward: you book a free estimate, we walk the openings, and you get a written line-item quote before any work starts.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Common CGI Windows & Doors Problems We Solve in Boulder City
These are the CGI issues that come up most in Boulder City’s climate and housing stock. Each one has a cause worth understanding, because the fix depends on it.
- Warped, binding single-hung sashes. Vinyl single-hung sashes warp and bind in Boulder City’s 100°F-plus summer heat, so the top sash drops on its own or the tilt-latch no longer seats flush. Once a sash has warped past a certain point, hardware swaps won’t fix it; the sash or the whole unit needs replacing. We check the balance and the frame square before recommending which.
- Dust-packed roller and slider tracks. Horizontal roller windows and 3-lite sliders pack their tracks with monsoon dust and grit, which flat-spots the wheels until the panels drag or jump the track. It’s not a manufacturing fault, it’s a maintenance and hardware-wear issue. New roller assemblies and a proper track cleaning solve most of it.
- Fogged glass from UV-killed glazing seals. Intense high-altitude UV breaks down glazing seals, and once moisture gets past them the insulated glass unit fogs from the inside. West- and south-facing CGI units take the worst of it. A fogged IGU is a sealed-unit failure, not something a cleaning product fixes.
- Dried, drafty perimeter weatherstripping. Desert UV dries weatherstripping until it cracks and pulls away, and then the perimeter of a CGI unit drafts and lets dust in. It shows up worst on the sun-facing elevations. UV-durable replacement seals are the fix, and they matter more here than in milder climates.
- Insert replacements set into rotted original frames. Where a CGI insert-style replacement went into a rotted Depression-era wood or steel sash frame, the original opening was often out of square to begin with, and the new unit leaks at the head and sill. This is the failure mode Boulder City sees most, and it’s usually a frame problem dressed up as a window problem.
CGI Service in Boulder City: What Local Conditions Mean for Your Project
Because Boulder City is the only Nevada city that bans gambling and enforces a strict historic preservation district, CGI replacement work in the 1930s core often has to match the original multi-lite wood or steel sash profile rather than drop in a standard vinyl insert. That scrutiny simply doesn’t apply in neighboring Henderson or Las Vegas, and it changes the job. A standard CGI vinyl single-hung that’s perfectly acceptable in a newer subdivision may not match the era-respectful look the district expects on a Boulder Dam-era bungalow near the historic core.
So the question shifts from “which unit is cheapest” to “which unit fits this opening and this street.” That’s a custom-fabrication and restoration problem, not a standard insert swap. It’s also why we walk the openings in person before quoting: the profile, the trim and the surrounding housing stock all factor in. If you’re weighing options on an older Boulder City home, see our CGI product overview for the kinds of units that suit this housing.
CGI Models & Products We Service in Boulder City
We service the CGI window types that actually show up in Boulder City homes: vinyl single-hung and double-hung replacement windows, horizontal roller (slider) windows, 3-lite sliding three-panel units, and casement and awning units. On the door side, we install and service entry doors as part of full exterior-opening coverage, so a CGI window project and a door replacement can run under one contractor instead of two.
Parts selection is where a lot of CGI service goes wrong. Bravado doesn’t fit a window. We match CGI-specific tilt latches, roller assemblies, sash balances and glazing beads to the actual series rather than forcing a generic part to work, and where a frame is sound we’ll repair the sash and hardware instead of tearing out a good frame. On Boulder City’s rotted original wood and steel openings, full-frame replacement is often the more sensible move, and we’ll tell you which applies to your openings.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Boulder City
Every job is priced per job by a written estimate, because the honest range depends on the opening, the frame condition and the product. A hardware and seal repair on a sound frame sits at the low end. Full-frame replacement where the original wood or steel opening has to be trued, re-milled or rebuilt sits at the high end.
| Service | Typical estimated range |
|---|---|
| Hardware repair (roller, balance, tilt-latch) | Lower-cost repair tier |
| Weatherstripping and seal replacement | Lower-cost repair tier |
| Fogged IGU / sealed-unit replacement | Mid-range |
| Full-frame replacement in an original opening | Higher-cost install tier |
What drives cost is frame condition first, product second. A CGI insert set into an out-of-square Depression-era opening may need the opening trued or re-milled before any unit fits, and that labor is real. A free estimate includes walking each opening, checking the frame square and hardware, and giving you a written line-item quote so the scope is clear before work starts. Call (888) 335-0658 for a free estimate specific to your Boulder City home.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Windows & Doors in Boulder City
Yes, but it usually needs more than a drop-in insert. The opening is often out of square and the original frame has checked from decades of heat, so the unit has to be sized and seated to the actual opening, and the perimeter resealed properly. In the historic core, the profile may also need to match the original multi-lite look. We assess each opening in person before quoting, so call (888) 335-0658 to book a free estimate.
Monsoon dust and grit pack the tracks, and the wheels flat-spot until the panels drag or hop off the track. It’s a wear-and-cleaning issue, not a sign the whole window is finished. Replacing the roller assemblies and clearing the track solves most of it, and a UV-durable seal around the perimeter keeps more dust from getting back in.
It can, yes. The district expects replacements in the 1930s core to respect the original multi-lite wood or steel sash profile rather than accept a standard insert, which means the right unit is chosen for the era, not for what’s easiest to install. That scrutiny is specific to Boulder City and doesn’t apply in Henderson or Las Vegas. Call (888) 335-0658 and we’ll walk your openings and talk through what fits.
Almost certainly, yes. High-altitude UV breaks down the glazing seal, moisture gets into the insulated glass unit, and it fogs between the panes. It’s not something cleaning fixes. On a west- or south-facing unit that takes the worst sun, the sealed unit typically needs replacing. We can assess it during a free estimate.
They can, and it’s worth weighing. Boulder City’s extreme summer sun and monsoon wind and dust storms put real stress on seals and drafts, so low-E glass, durable UV-resistant weather seals and impact-rated options all earn their place on a sun-baked elevation. The right pick depends on which exposure your windows face. Call (888) 335-0658 for a free estimate and we’ll match product to the opening.
Service Areas Near Boulder City
We serve Boulder City and the surrounding communities, including Sunrise Manor, Whitney, Winchester, North Las Vegas, Paradise and Henderson. If you’re just outside the Boulder City line, call and we’ll confirm coverage. See our Boulder City page for more on how we work in this town.
Book Your CGI Service in Boulder City Today
Whether a CGI single-hung is binding in the heat or a slider is jumping the track, the first step is a free estimate. We’ll walk your openings, check the frames and hardware, and give you a written line-item quote before any work begins. Call (888) 335-0658. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Sunrise Manor Windows & Doors.