Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Windows & Doors in Sunrise Manor, NV
We handle CGI window and door work across Sunrise Manor, from corroded slider tracks to full replacement of failed dual-pane units, as an independent service provider. The one thing that makes CGI work different here: Sunrise Manor sits in unincorporated Clark County, so replacements are permitted through the county, not the City of Las Vegas, and the county inspections catch flashing problems that retrofit crews miss. Our technicians have up to 8 years of experience with CGI products. Call (888) 335-0658 for a free estimate.
Why Sunrise Manor Residents Choose Us for CGI Service
We work on CGI units every week in Sunrise Manor, so we know the models that show up in this housing stock and the ways they fail. The CGI Series 8000 Vinyl Single-Hung and the CGI Series 3000 Aluminum Slider are the two we see most on the 1960s and 1970s ranch homes here, and each fails in its own pattern after years of desert sun and driven dust.
That familiarity cuts down on the guesswork. When we look at a sticking slider in a Sunrise Manor home, we can predict what we’ll find before we open the panel. And because we work with eight manufacturers across impact-rated and energy-efficient lines, we can tell you honestly whether a repair makes sense for your CGI unit or whether replacing it with a newer product is the better use of your money. We serve Sunrise Manor without a brand agenda.
The scheduling is straightforward. Call us, describe what the window or door is doing, and we’ll set a time for a free estimate. We answer 24/7 and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Common CGI Windows & Doors Problems We Solve in Sunrise Manor
These are the CGI issues that come up most in Sunrise Manor homes, and each one ties back to something specific about the houses and climate here.
- Corroded tracks and rollers on CGI aluminum sliders. The CGI Series 3000 Aluminum Slider is common on mid-century Sunrise Manor homes, and its aluminum tracks pit and corrode after years of dust abrasion and heat cycling. You end up with a window that won’t slide smoothly, rattles in monsoon wind gusts, and leaks air at the meeting rail. We can rebuild the track and replace the rollers when the frame is still sound.
- Failed glazing seals and fogging on dual-pane units. Desert UV breaks down the sealant around the glass edge, moisture gets into the air gap, and the desiccant inside saturates. The result is a permanently fogged pane and a window that no longer insulates. On a Sunrise Manor home with 100°F summers, that failed seal means the glass is radiating heat straight into the room.
- Weatherstripping and door sweep failure on sliding glass doors. The CGI Series 7000 Sliding Glass Door relies on seals and a sweep to keep wind-driven dust out. Heat hardens the weatherstripping, dust works behind it, and the door starts dragging and letting grit into the track. It’s one of the most common complaints we hear in Sunrise Manor.
- Stucco cracking and water intrusion around window perimeters. Sunrise Manor’s tract homes are stucco over wood frame or block, and when an original window was installed without proper flashing, water finds the seam and the stucco cracks. Any replacement needs the flashing and the stucco patch done correctly or the leak comes back.
- Hard operation and misalignment on CGI casement windows. The CGI Series 5000 Casement crank and hinge hardware can seize or wear in a dusty environment, leaving the sash hard to open or unable to close tight. A hardware and hinge service usually restores smooth operation before the frame itself becomes a problem.
CGI Service in Sunrise Manor: What Local Conditions Mean for Your Project
Sunrise Manor is unincorporated Clark County, and that single fact reshapes how a CGI replacement project runs here. Every window and door replacement pulled in a Sunrise Manor home goes through Clark County permitting rather than the City of Las Vegas, and county inspectors look closely at how a new unit is flashed and sealed into the wall. In this neighborhood of 1950s through 1970s stucco-on-wood-frame and block ranch homes, the original CGI aluminum openings often lack the flashing detail a modern unit needs. So the inspection stage isn’t a formality; it’s where retrofit shortcuts get caught. We plan the flashing and stucco patch into the project from the first estimate, because a replacement that passes inspection in Sunrise Manor has to do more than fit a rough opening. It has to prove the wall assembly around it will keep water out. That’s the piece generic CGI guides leave out, and it’s the part that matters most on these stucco tract homes.
CGI Models & Products We Service in Sunrise Manor
The CGI product range we handle in Sunrise Manor covers the full exterior opening. On the window side, that means the CGI Series 8000 Vinyl Single-Hung, the CGI Series 3000 Aluminum Slider, and the CGI Series 5000 Casement, plus sliding glass doors on the CGI Series 7000 platform. Across those units we repair tracks, rollers, hinges, cranks and seals, and we replace glazing that has failed. We also install replacement windows and doors, including horizontal roller windows, vinyl replacement windows, and impact-resistant windows suited to Sunrise Manor’s storm exposure.
When we source parts for a CGI repair, we use quality parts that match the original CGI specifications, because cheap hardware fails fast in desert heat. For energy performance, we size low-E dual-pane glass to the unit and to the home. We are an independent provider, not affiliated with or authorized by CGI, and we don’t claim to be a CGI dealer. What we offer is knowledge of these products in Sunrise Manor conditions and an honest read on repair versus replacement.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Sunrise Manor
Pricing on CGI window and door work in Sunrise Manor is set per job through a free written estimate, since the final cost depends on the unit, the size, and the condition of the opening. A few factors drive the number: whether the frame is repairable or needs replacement, whether the glass has to be replaced or reglazed, whether stucco patching is required, and whether the project needs a Clark County permit and inspection. A typical job scenario runs like this: a homeowner on a vintage Sunrise Manor ranch notices a CGI aluminum slider sticking and rooms overheating by midday. An independent pro finds corroded tracks, failed seals and worn weatherstripping, then either rebuilds the track and seals or installs custom-sized vinyl units with low-E glass, flashing and stucco patching. We lay out every one of those decisions in the estimate, so you see what each option costs before you commit. Call (888) 335-0658 for your free estimate.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Windows & Doors in Sunrise Manor
Yes. Because Sunrise Manor is unincorporated Clark County, window and door replacements go through Clark County permitting and inspection, not the City of Las Vegas. Permit scope and fees depend on the project, so confirm the details with the county building department, and we’ll fold the permit and inspection into your free estimate. Call (888) 335-0658 for an exact quote.
The combination of fine desert dust and intense heat wears down aluminum tracks and rollers faster than in cooler climates, so the CGI Series 3000 Aluminum Slider here tends to pit and seize sooner. Regular track cleaning helps, but once the corrosion is deep, a track rebuild or replacement is the durable fix. Call (888) 335-0658 to have us look at the slider.
Often yes, by replacing the unit with an impact-rated window sized to your opening, or by upgrading glazing where the frame supports it. In Sunrise Manor homes with original aluminum frames, a full replacement is usually the sounder route once the frames show corrosion. We can walk you through both paths at your free estimate. Call (888) 335-0658.
The weakest points are the weatherstripping and the door sweep, both of which harden and wear out under desert heat and dust. Replacing the seals and sweep on a CGI Series 7000 Sliding Glass Door usually restores a tight fit and stops the grit getting in. If the track or rollers are worn too, we’ll address those in the same visit. Call (888) 335-0658 for an exact quote.
Yes. The CGI Series 8000 Vinyl Single-Hung and similar vinyl units hold up to desert heat and UV better than the original aluminum they often replace, and paired with low-E dual-pane glass they cut the midday heat gain that bakes these ranch homes. The key is correct installation, including proper flashing and stucco patching around the opening. Call (888) 335-0658 and we’ll recommend the right fit for your Sunrise Manor home.
Service Areas Near Sunrise Manor
We handle CGI window and door work in Sunrise Manor and the surrounding area. That includes CGI work for homeowners near Whitney, and CGI repairs and installations for homes in Winchester. We also cover North Las Vegas, Paradise, and Henderson. If you’re in or around any of these communities, the free estimate applies.
Book Your CGI Service in Sunrise Manor Today
If a CGI window or door in your Sunrise Manor home is sticking, fogging, or letting the heat in, the next step is a free written estimate. We’ll assess the unit, explain whether repair or replacement makes the most sense, and lay out the Clark County permit and inspection step clearly. Call (888) 335-0658 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Sunrise Manor Windows & Doors.